Answers

2014-06-11T17:26:24+05:30
Place the LM 386 in the project board 
take a wire and join the 3 pin to the 4 pin [GNDpin] 
join the one pin of 0.01 capacitor with the 2nd pin of IC. the other pin of the capacitor should be joined with the input 
now join the 1 pin of  IC with the pin A pin of the 5k ohm variable resistor 
join the A pin of this variable resistor with the c pin .lastly join the 8 th of IC with the B of this variable resistor .this becomes the GAIN
join the +ve side of the 100 micro farad capacitor with 6th pin of IC.the -ve of this capacitor should be joined with GND pin [4th pin of IC] 
0
MARK AS THE BEST PLZ AND ALSO CLICK ON THE THANKYOU BUTTON